UsersWiki Backup : [Diff of nao-pon/blog/2021-06-15]

View the source.
Go to nao-pon/blog/2021-06-15.

@@ Line 1: / Line 1: @@
+#navi
+RIGHT:&rsslink(../);
+#boxdate
+* ミンティア[MINTIA] で WiFi 6ボタンスイッチを作った :-D [#i7d337be]
+RIGHT:&tag(WiFi,ESP-32,DIY,HomeAssistant,Hass.io,ESPHome);
+Google Home や Alexa と HomeAssistant を統合しているので、声で大体のことはできる・・・けど。
+声を発声して、アシスタントに認識させるのが、面倒くさいと感じる。なんてわがままな！ :lol:
+だって、正しく認識してくれないと、もう一度言い直したり、見当違いのスイッチを ON/OFF されたり・・・
+そこで、やっぱり物理ボタンですよ！
+ちょうど手元にミンティアとESP-32が転がっていて・・・。ん？これ入るんじゃね？って思ったところ。
+おぉー！やっぱりピッタリじゃないですか！厚みが若干きついけど。
+で、結果こうなりました。やっぱりボタンで操作できるのは快適です。USB電源はいるけどね。
+&ref(site://modules/xelfinder/index.php/view/10/DSC_3857.JPG,left,mw:180,mh:180);&ref(site://modules/xelfinder/index.php/view/8/DSC_3856.JPG,left,mh:180);
+#clear
+ボタンの穴あけを少し失敗したけど、今度作るときはもう少しきちんと作ろう！
+ボタンを押すと青いLEDが光ります。
+** いるもの ((価格は購入時のもの)) [#ibd9ea71]
+- [[ESP-32 モジュール:https://ja.aliexpress.com/item/32823593448.html]] 474円 ((Aliexpress で買ったけど、技適マークはついていました。))
+- [[タクトスイッチ:https://www.marutsu.co.jp/pc/i/599871/]] 10円 × 6
+- ミンティアの空き容器
+- 適当なユニバーサル基板
+- 2mmポリウレタン銅線 適宜
+** ESPHome の設定 [#j6fe7996]
+esp32_ble_tracker は、手元に Qmote-S があったので、うまく使えないかな？と思って試してみたけど、検知範囲が狭くてほぼ使えなかった。残念。
+#code(yaml){{
+substitutions:
+  devicename: switch_box_11
+esphome:
+  name: $devicename
+  platform: ESP32
+  board: wemos_d1_mini32
+  on_boot:
+    - priority: 1000
+      then:
+        - while:
+            condition:
+              not:
+                api.connected:
+            then:
+            - switch.turn_on: led
+            - delay: 500ms
+            - switch.turn_off: led
+            - delay: 500ms
+wifi:
+  networks: !include common/wifi.networks.yaml
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap: !include common/wifi.ap.yaml
+  manual_ip:
+    static_ip: 192.168.1.xx
+    gateway: 192.168.1.1
+    subnet: 255.255.255.0
+captive_portal:
+# Enable logging
+logger:
+# Enable Home Assistant API
+api:
+ota:
+esp32_ble_tracker:
+  id: ble_tracker
+  on_ble_manufacturer_data_advertise:
+    - mac_address: 88:4A:XX:XX:DE:52
+      manufacturer_id: 004C
+      then:
+        - lambda: |-
+            if (id(qmote_de52_click).state == false) {
+              id(qmote_de52_click).publish_state(true);
+              id(qmote_de52_click).publish_state(false);
+            }
+    - mac_address: 88:4A:XX:XX:99:BB
+      manufacturer_id: 004C
+      then:
+        - lambda: |-
+            if (id(qmote_99bb_click).state == false) {
+              id(qmote_99bb_click).publish_state(true);
+              id(qmote_99bb_click).publish_state(false);
+            }
+    - mac_address: 88:4A:XX:XX:9F:03
+      manufacturer_id: 004C
+      then:
+        - lambda: |-
+            if (id(qmote_9f03_click).state == false) {
+              id(qmote_9f03_click).publish_state(true);
+              id(qmote_9f03_click).publish_state(false);
+            }
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO23
+      inverted: True
+      mode: INPUT_PULLUP
+    name: "$devicename btn1"
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: gpio
+    pin:
+      number: GPIO19
+      inverted: True
+      mode: INPUT_PULLUP
+    name: "$devicename btn2"
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: gpio
+    pin:
+      number: GPIO18
+      inverted: True
+      mode: INPUT_PULLUP
+    name: "$devicename btn3"
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: gpio
+    pin:
+      number: GPIO33
+      inverted: True
+      mode: INPUT_PULLUP
+    name: "$devicename btn4"
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: gpio
+    pin:
+      number: GPIO05
+      inverted: True
+      mode: INPUT_PULLUP
+    name: "$devicename btn5"
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: gpio
+    pin:
+      number: GPIO26
+      inverted: True
+      mode: INPUT_PULLUP
+    name: "$devicename btn6"
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: template
+    id: qmote_de52_click
+    name: "$devicename Qmote de52 Click"
+    filters:
+      delayed_off: 800ms
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: template
+    id: qmote_99bb_click
+    name: "$devicename Qmote 99bb Click"
+    filters:
+      delayed_off: 800ms
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+  - platform: template
+    id: qmote_9f03_click
+    name: "$devicename Qmote 9f03 Click"
+    filters:
+      delayed_off: 800ms
+    on_press:
+      then:
+        - switch.turn_on: led
+    on_release:
+      then:
+        - switch.turn_off: led
+sensor:
+  - platform: wifi_signal
+    name: "$devicename WiFi"
+    update_interval: 60s
+    unit_of_measurement: "%"
+    filters:
+      - lambda: x = 2 * (x + 100); if (x < 0) {x = 0;} else if (x > 100) {x = 100;} return x;
+switch:
+  - platform: restart
+    name: "$devicename Restart"
+  - platform: gpio
+    pin:
+      number: GPIO2
+    name: "$devicename LED"
+    id: led
+}}
+RIGHT:&font(90%){&page_comments;};
+#navi

Backup diff of nao-pon/blog/2021-06-15(No. All)
- Cur: 2021-06-15 (Tue) 11:06:01 nao-pon

Page Info
Page Name :	nao-pon/blog/2021-06-15
Page aliases :	None
Page owner :	nao-pon
Can Read
Groups :	All visitors
Users :	All visitors
Can Edit
Groups :	No one
Users :	ゲスト