SwitchBot 温湿度計を ESP32 でモニタリング :: XOOPS マニア

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51

substitutions:
  devicename: switchbot_meter
 
sensor:
  - platform: template
    name: "$devicename Humidity"
    id: humidity0
    unit_of_measurement: '%'
    accuracy_decimals: 0
    icon: "mdi:water-percent"
  - platform: template
    name: "$devicename Temperature"
    id: temperature0
    unit_of_measurement: '°C'
    accuracy_decimals: 1
    icon: "mdi:thermometer"
  - platform: template
    name: "$devicename BT RSSI"
    id: rssi0
    unit_of_measurement: 'dB'
    accuracy_decimals: 0
    icon: "mdi:bluetooth"
  - platform: template
    name: "$devicename Battery"
    id: battery0
    unit_of_measurement: '%'
    accuracy_decimals: 0
    icon: "mdi:battery"
 
esp32_ble_tracker:
  scan_parameters:
    duration: 60s
  on_ble_advertise:
    - mac_address: f4:42:fa:b4:72:2a
      then:
        - lambda: |-
            for (auto data : x.get_service_datas()) {
                if(data.data.size() == 6) {
                  float temperature = (float)(data.data[4] & 0b01111111) + ((float)(data.data[3] & 0b00001111) / 10);
                  if (!(data.data[4] & 0b10000000)) {
                    temperature = -temperature;
                  }
                  int8_t humidity= data.data[5] & 0b01111111;
                  int8_t battery = data.data[2] & 0b01111111;
                  int8_t rssi=x.get_rssi();
                  id(humidity0).publish_state(humidity);
                  id(temperature0).publish_state(temperature);
                  id(rssi0).publish_state(rssi);
                  id(battery0).publish_state(battery);
                }
            }